Booster Kit

This kit includes pieces specifically recommended by VEX builders to maximizemaximise versatility. Contains over 600 pieces of VEX Structural and Motion Components.

Some of the parts are not listed in Kit Contents. Please refer to Description below.

(1) 25x25x2 Steel Chassis (14) Steel Plates & Bars (6) Steel Angles (6) Steel C-Channels (12) Steel Gussets (25) Gears & Rollers (70) Collars & Shafts & Bearings (66) Standoffs & Spacers (408) Screws & Nuts & Washers

Steel Chassis (2) 2x2x25 Steel Chassis Bumpers (4) 2x1x25 Steel Chassis Rails

Steel Plates & Bars (2) 5x5 Steel Plates (2) 5x15 Steel Plates (2) 5x25 Steel Plates (8) 1x25 Steel Bars

Steel Angles (2) Slotted 30 Hole Steel Angles (2) Slotted 30 Holes Steel Inverse Angles (2) Segmented 25 Hole Steel Angles

Steel C-Channels (2) 1x2x1x15 Steel C-Channels (2) 1x2x1x25 Steel C-Channels (2) 1x5x1x25 Steel C-Channels

Steel Gussets (4) Pivot Gussets (4) Angle Gussets (4) Plus Gussets Gears & Rollers

(4) Intake Rollers (4) 12T Gears (4) 36T Gears (4) 60T Gears (2) 84T Gears (4) 19T Rack Gears

Collars & Shafts & Bearings (16) Shaft Collars (4) 11mm Shafts (4) 2" Shafts (4) 3" Shafts (2) 4" Shafts (4) 12" Shafts (26) Flat Bearings (6) Pillow Block Bearings (4) Plastic Lock Plates

Standoffs & Spacers (10) 1/2" Standoffs (8) 1" Standoffs (4) 2" Standoffs (4) 3" Standoffs (20) 4.6mm Shaft Spacers (20) 8mm Shaft Spacers

Screws & Nuts & Washers (70) #8-32 x 1/4" Hex Screws (28) #8-32 x 3/8" Hex Screws (28) #8-32 x 1/2" Hex Screws (14) #8-32 x 3/4" Hex Screws (10) #6-32 x 1/4" Hex Screws (10) #6-32 x 1/2" Hex Screws (30) Steel Washers (10) Plastic Washers (130) #8-32 Keps Nuts (28) #8-32 Nylock Nuts (50) Bearing Attachment Rivets

• (10) #6-32 x 1/2" Screw — 275-1169
• (10) #6-32 x 1/4" Screw — 275-0659
• (130) #8-32 Keps Nut — 275-1026-000
• (28) #8-32 Nylock Nut — 275-1027-000
• (28) #8-32 x 1/2" Screw — 275-1004
• (70) #8-32 x 1/4" Screw — 275-1002
• (14) #8-32 x 3/4" Screw — 275-1006
• (28) #8-32 x 3/8" Screw — 275-1003
• (8) 1 x 25 Steel Bar — 275-1141-000
• (8) 1.00" Standoff — 275-1016-000
• (10) 1/2" Standoff — 275-1014-000
• (4) 12T Gear — 276-2232-041
• (4) 2.00" Standoff — 275-1018-000
• (4) 24x Pitch Shaft — 228-2500-269
• (4) 3.00" Standoff — 275-1020-000
• (4) 36t Gear — 276-2169-002
• (20) 4.6mm Plastic Spacer — 276-2018-000
• (4) 4x Pitch Shaft — 228-2500-120
• (2) 5x15 Steel Plate — 275-2023-000
• (2) 5x25 Steel Plate — 275-1140-000
• (4) 60t Gear — 276-2169-003
• (4) 6x Pitch Shaft — 228-2500-122
• (2) 84t Gear — 276-2169-004
• (20) 8mm Plastic Spacer — 276-2019-000
• (2) 8x Pitch Shaft — 228-2500-124
• (4) Angle Gusset — 276-1110-003
• (50) Bearing Attachment Rivet — 276-2215-000
• (26) Bearing Flat — 276-1209-000
• (4) Intake Roller — 276-1499-000
• (4) Plus Gusset — 276-1110-001
• (16) Shaft Collar — 276-2010-000
• (30) Steel Washer — 275-1024-000
• (10) Teflon Washer — 275-1025-000